HOME
 CONTACT US      YOUR CART


NEW ITEMS

AQUARIUM SUPPLIES

PONDS AND SUPPLIES

REPTILE SUPPLIES

GIFT CERTIFICATES

SALE ITEMS



Customer Service

Shipping & Ordering Info.

Privacy & Security

Returns

Customer Testimonials

Disclaimer






Home » AQUARIUM SUPPLIES » Filter Media, Inserts, Carbon, Phosphate Removers, & Resins » Phosphate and Nitrate Removers

Phosphate and Nitrate Removers



Brightwell Aquatics Regenerat-phor - 1.2kg

Brightwell Aquatics Regenerat-phor - 1.2kg
Item Code: ROYABAREGP1200

Regenerates Brightwell Aquatics PhosphatR Phosphate-Adsorption Media


Regenerates up to 1,500 ml total of Brightwell Aquatics PhosphâtR regenerable
phosphate-adsorption resin.


Regenerates:
175 ml size 8 times
250 ml size 6 times
500 ml size 3 times

Instructions and Guidelines
Regeneration must be performed in a vessel outside of the aquarium; failure to follow this guideline will result in changes to aquarium water chemistry that can be extremely harmful, if not fatal, to aquarium inhabitants. The solution that is made by following the instructions below has a relatively high pH and should be handled carefully. It is strongly recommended that protective eyewear and rubber gloves be worn as a precautionary measure.
For each 250 ml of resin to be regenerated: In a clean 1-gallon bucket or pail, thoroughly mix 200 g (~¾ cup) RegenerātPHOR with ½ gallon hot tapwater. Regeneration efficiency is directly related to reaction time between the resultant solution and the PhosphātR resin. The ideal set-up for regeneration is to place resin inside a mesh bag (if not already in one) and place the bag inside the mouth of a large funnel; funnel size must be large enough to contain entire bag and contents. Alternately, an empty ½ gallon LDPE plastic milk jug can be used by cutting off the bottom, placing a small hole in the cap, screwing the cap on tightly, turning the jug upside down, and placing the bag of resin inside the large opening. Next, slowly pour the RegenerātPHOR solution through the resin; the size of the hole through which the solution drains will help regulate the time of reaction with the resin (smaller is better). The solution should be discarded once it has been passed through the resin. Then, repeat the basic steps, substituting twice the volume of purified water for the RegenerātPHOR solution used, discarding the water once this step is completed. The PhosphātR resin must be thoroughly rinsed with purified water before resuming use in an aquarium. Once the PhosphātR resin has been rinsed, it is once again ready for use in an aquarium system as instructed on the PhosphātR label.


Quantity : 

$CAD 10.99