HOME
 CONTACT US      YOUR CART


NEW ITEMS

AQUARIUM SUPPLIES

PONDS AND SUPPLIES

REPTILE SUPPLIES

GIFT CERTIFICATES

SALE ITEMS



Customer Service

Shipping & Ordering Info.

Privacy & Security

Returns

Customer Testimonials

Disclaimer






Home » AQUARIUM SUPPLIES » Reverse Osmosis Filters & Accessories

Reverse Osmosis Filters & Accessories



1/4

1/4" Electric Solenoid Valve with Push-In Connectors, Normally Closed, 12-Volt DC
Item Code: 17722915

This is a great valve for automating RO top off, automatic water changes or for limiting the frequency and amount of time per day that an RO unit receives water input (this greatly improves RO water quality)

These valves are suitable for potable (drinking) water, but do not have any 3rd party certifications such as NSF 61. All the "wet" components are made out of FDA listed materials.

Like most diaphragm-type valves, this valve requires minimum pressure (3 psi) to open. It is intended to be used in pressurized systems, not in gravity feed systems. .

Many 1/4" valves have very small orifices (typically 1/8" or smaller). This valve has a large 11/32" (8.5 mm) orifice so any restriction in your system will be minimal.

The Push-In connectors are designed for 1/4" OD (outside diameter) polyethylene tubing. The connector will accept other semi-rigid or rigid tubing that has a 1/4" OD. Flexible hose will not seal.


The valve coil is nylon encapsulated and is water resistant (but may not be submerged).

The coil is rated for continuous duty, which means that the coil temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves.

◦3 to 145 PSI (0.2 to 10 BAR)
◦175° F (80° C) Max Media Temp
◦Nylon valve body
◦Stainless Steel internal components
◦NBR diaphragm
◦1/4" PUSH-IN Connectors
◦Use with 1/4" OD tubing
◦Normally Closed (N/C)
◦2-way / 2-position valve
◦Pilot operated diaphragm valve
◦11/32" (8.5 mm) internal orifice



◦12-Volt DC / 500+ mA power supply required - sold separately

No polarity requrements for power, must be instaled according to flow direction indicated on valve body, do not instal with coil hanging down





Quantity : 

$CAD 29.99